How to install the CNC lathe?

Lifting and transportation

The hoisting and positioning of the machine tool should use the special hoisting tools provided by the manufacturer, and other methods are not allowed. No special lifting tools are required, and a wire rope should be used to lift and place it in place according to the instructions specified in the instructions.

Foundation and location

The machine tool should be installed on a firm foundation, and the location should be far away from the source of vibration; avoid sunlight and heat radiation; be placed in a dry place to avoid the influence of humidity and airflow. If there is a vibration source near the machine tool, an anti-vibration trench must be set around the foundation.

Machine tool installation

The machine tool is placed on the foundation, it should be leveled in a free state, and then the anchor bolts should be evenly locked. For ordinary machine tools, the level meter does not exceed 0.04/1000mm, and for high-precision machine tools, the level meter does not exceed 0.02/1000mm. When measuring the installation accuracy, it should be carried out at a constant temperature, and the measuring tool should be used after a certain temperature period. When installing the machine tool, every effort should be made to avoid forced deformation of the machine tool. Some parts of the machine tool should not be disassembled casually when the machine tool is installed. The disassembly of the parts may cause the redistribution of the internal stress of the machine tool, thereby affecting the accuracy of the machine tool.